Diamond Systems Tritan Instrucciones de operaciones descargar pdf (Pagina 56)

Installation

Location

• Locate the autocast universal

230 in a clean dry room.

• Ensure that the room is sufficiently spacious

• Do not position the autocast universal

230 close to ovens or

other heat generating devices

• The autocast universal

230 is a bench unit.

Bench height, 85–90 cm /33

⁄2 –35

⁄2”.

• Ensure that the bench is sufficiently stable and does not

wobble (minimum carrying capacity 100 kg/220 lbs.)

• The distance between the wall of the room and the back

panel of the machine should be approximately 20 cm/8”.

• Align the unit by using a spirit level and the adjustable legs.

• Ensure that the working area is well illuminated.

Electrical connection

The unit is connected to the power supply via a grounded

safety socket. Distance from unit is 1 metre.

Connected load: 230 V, 3-phase, 50-60 Hz,

4,6 kVA

Cable length: 2 m

Socket: protected by 1 x16 A slow acting

Neozed fuse

Argon supply

Use only argon of the following classification:

Argon 4.8 HR 99.998% to DIN 32526 or higher purity

Size of argon cylinder: 10 litres min.

• Secure the argon cylinder with a chain to prevent it from

falling over

• the argon cylinder at a maximum distance of 1 metre from

the machine

• Connect the pressure regulator to the argon cylinder using

an open ended wrench

Push the argon hose onto the coupling (argon) in the back

panel of the unit and connect the other end to the pressure

regulator using a hose clamp.

Always make sure that the valve at the gas bottle

is opened and that there is enough gas in the gas

container.

autocast universal

230 Casting System Installation Stand 1.9. 03 B 16

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 89 90

Comentarios a estos manuales

Sin comentarios

Diamond Systems Tritan Instrucciones de operaciones Pagina 56

Comentarios a estos manuales

Relacionado con productos y manuales para Cajas eléctricas Diamond Systems Tritan